Coolbe: Este produto é um dispositivo médico que deve ser usado apenas como pretendido e de acordo com as instruções de uso.
Este dispositivo não substitui o aconselhamento, diagnóstico ou tratamento médico profissional. Consulte um profissional de saúde qualificado antes de usar em caso de dúvida. O vendedor/distribuidor não é responsável por quaisquer danos decorrentes de uso indevido, modificação não autorizada ou uso além das indicações indicadas.
-----
Product Name: Black Warrior Tattoo Machine
Motor：Customized Coreless Motor
Motor Speed：12V/12000RPM
Stroke：4.0mm
Voltage：4-12V
Battery Capacity：1500mAh
Battery Life：5-6Hours
Charging interface: Type-C
Battery Start Modes：Jump Start / Stable Start
Dual Working Mode：Normal mode / Dot mode
Size：40*110mm
Weight：198g
Operating Instructions:
1. Long press "Power button" to turn on/off the machine.
2. Click "Power button" to turn on/off the motor. (Blue V: open; Grey V: closed;)
3. Double click "Power button" to reset the working timer.
4. Click "M button" to select the memory gear value, NPS value, and HZ value in sequence.
5. Double "M button" to enable/disable the strong start function.
6. Long press "M button" to switch between prick mode/regular voltage mode.
7. Short press "+ button" to slowly increase the adjustment voltage value/memory gear value/NPS value/HZ value.
8. Long press "+ button" to quickly increase the adjustment voltage value/memory gear value/NPS value/HZ value.
9. Short press "- button" to slowly increase the adjustment voltage value/memory gear value/NPS value/HZ value.
10. Long press "- button" to quickly increase the adjustment voltage value/memory gear value/NPS value/HZ value.
Function Description:
1. Without any operation, the screen brightness will decrease after 10 seconds to reduce energy consumption and interference during the working process.
2. The motor is not turned on, and the machine will automatically shut down after 5 minutes to reduce battery energy consumption.
3. The percentage value flashes when the battery level is below 10%, the motor stops working when the battery level is below 3%, and there is a low battery warning.
4. During the operation of the motor, if a high current fault occurs, the motor will automatically stop working and prompt a locked rotor fault code.
5. During the operation of the motor, if a short circuit fault occurs, the motor will automatically stop working and prompt a short circuit fault code.
6. At any time when the charger is connected, the battery enters the charging state directly, the charging symbol is displayed on the screen, and the motor is prohibited from working to ensure charging safety.
