Silicone for Harmless and odorless molding Ideal for chocolate candle handmade soap and Standard Molding HTV-2000 1KG. material. molds, molds, molds,

This non-toxic, odorless, low-viscosity molding silicone is safe for beginners. ★It is possible to replicate food, chocolate, clear resin, resin, candles, soap, etc. ★Its low viscosity makes it easy for general customers to make, and the completed silicone mold can withstand temperatures up to 200°C. ★How to use HTV-2000: Mix the liquid types A and B thoroughly with a spatula (for about 2 minutes), then pour into the mold containing the original. After 8 hours (23°C), it will become a female silicone rubber mold. Wash it with a neutral detergent, then apply butter to the mold and pour in chocolate. Additive-type food-grade adhesive. Milky white, translucent. Specific gravity: 1.08. Hardness: 18. Viscosity: 4500. Elongation: 500%. Shrinkage: 0.1%. Tensile strength: 4.8 MPa. Tear strength: 25 kN/m. Working time: 35 minutes. Demolding time: 8 hours (at 23°C). ★HTV-2000 is a milky-white, translucent silicone with a hardness of 18, a 500% elongation rate, and a low viscosity of 4500 cps. It hardens to a slightly softer hardness after curing. It is suitable for single-sided molding. It can also be used for food molds, candle molds, soap molds, and molded silicone. The standard cure time is 8 hours (23°C). Most modeling silicones are condensation silicones intended for industrial use (modeling). Most contain harmful ingredients (tin compounds) in the hardener, making them unsuitable for food molds, candle molds, soap molds, or for use in close contact with skin. However, the HTV series is a harmless, odorless silicone that can be used for food molds. Its low viscosity allows for easy individual molding. *Required items: Original model, kitchen scale (1g increments), spatula, clear cup (paper cup), etc. *Flower clay is used to mold double-sided food-grade silicone and to hold the original model. *Butter or Vaseline can be used as a release agent for silicone to silicone double-sided molds. ★★★When using the double-sided mold removal method, apply a thin layer of salad oil to the flower clay with a brush to remove it cleanly from the silicone after it hardens. (Most If you apply oil to the area, it will not harden. If you apply oil to the hardened silicone, the flower clay will easily peel off. ) Never apply oil to other models (resin, transparent resin, or other clay). Please test a small amount before use. *Instructions included *Contents: 1kg (500g x 2) set